Paradyne COMSPHERE 3610 Operator's Manual page 168

COMSPHERE 3600 Series Data Service Units
P3/4 FEPSh: Disab
Next Enab Disab
Ports 3 and 4 FEP Port Sharing . Allows you to create an FEP port-sharing group consisting of Ports 3 and 4.
This configuration option will not display if MUX is set to None or if a 2-port MCMP/Flex is installed.
3
Enab — FEP transmissions and controls pass through Port 3 to be broadcast onto the aggregate data
stream and to Port 4. Data to be received by the FEP comes from both the aggregate data
stream and Port 4.
Disab — Disables the FEP port-sharing feature for Ports 3 and 4.
P5/6 FEPSh: Disab
Next Enab Disab
Ports 5 and 6 FEP Port Sharing . Allows you to create an FEP port-sharing group consisting of Ports 5 and 6.
This configuration option will not display if MUX is set to None or if a 2-port MCMP/Flex is installed.
3
Enab — FEP transmissions and controls pass through Port 5 to be broadcast onto the aggregate data
stream and to Port 6. Data to be received by to the FEP comes from both the aggregate data
stream and Port 6.
Disab — Disables FEP port-sharing feature for Ports 5 and 6.
MCMP Bckup: MCMP
Next MCMP TDM
MCMP Backup . Determines the mode for backup. It is valid and displayed only when a Switched 56 DBM is
installed.
MCMP — Enables backup in MCMP mode.
TDM — Enables backup in TDM mode.
3
When enabled, the CTS lead is forced ON (high) for the odd-numbered port.
6-40
MCMP Setup (MUX Funct: MCMP) Configuration Options
Prev
Prev
Prev
Table 6-10
(4 of 4)
July 1999 3610-A2-GB91-90