Configuration Option Tables; Dsu Configuration Options - Paradyne COMSPHERE 3610 Quick Reference Manual

Configuration Option Tables

In the tables that follow, FacT (Factory Tributary) defaults are shown in boldface. If
different from the FacT defaults, FacC (Factory Control) defaults are shown in italics .
Key to symbols:
A
Configuration options that do not appear when Full mode is disabled using
Menu from the Configuration branch.
H
ISDN and Switched 56 Digital DBMs
L
ISDN DBM only
LL
V.32 Analog DBM only
F When the Async Sync configuration option is enabled using the MUX Port n
branch, the following DBM PrtSp settings do not appear: 32, 18.0, 8.4, 4.0,
and 2.0 kbps.
FF F
ISDN and 2-wire Switched 56 DBMs only
}
Not available for Switched 56 DBMs; defaults to 56 kbps.
}}
Ports 3–6 are not available for 2-port Flex MUX models.
z
Not available for a DBM- X or a DSU with Primary core set to Yes; the DSU is
Disabled
zz
4-wire Switched 56 DBM only
::
Appears when non-Flex MCMP/TDM is installed or 6-port MCMP/TDM Flex is
installed with firmware version less than 6.33

DSU Configuration Options

DSU
Configuration Options
Rate(Kbps)
TxClkSource
A Enab, Disab
Msg Clamp
TxElasStor
A Enab, Disab
RxElasStor
DD
A + 6, 0, –10
19.2 PowrLvl
A On, Off
64KScramblng
A On, Off
64KLatchLpbk
A AggSw, Forc, Disab
NetIntf
A Int, NetI, Prt1, Prt2, Prt3, Prt4, Prt5, Prt6
Net ITiming
A Enab, Disab
V.54 Lpbk
Diagnostic DSU
Configuration Options
Diag Type
A 100, 400, 800, 1200, 1600
2nd Ch(bps)
Disr Type
Auto, 64CC, 64L, 56, 38.4, 19.2, 9.6, 4.8, 2.4
Int, RXC, Ext, DDS, Prt1, Prt2, Prt3, Prt4, Prt5, Prt6
Enab, Disab
NonD, Disr, Mixed, None
2500, 2600, 3600s, 3600e, Br56
7
Value
Value