Diagnostic Compatibilities - Paradyne COMSPHERE 3610 Operator's Manual

DSU Compatibility
For primary channel communication, the standalone
Model 3610 and the carrier-mounted Model 3611 DSUs
are fully compatible with all Paradyne DSU products.
Point-to-point and multipoint circuits are not limited to
connections between 3600 Series DSUs; many other
combinations of equipment are possible.
Paradyne Device Communicating
with Model 3610/3611 DSU
3600 Series DSU
3500 Series DSU
2600 Series DSU (DATAPHONEr II)
2500 Series DSU
3056 DSU
3456 DSU
3610-A2-GB91-90
The compatibility of the
3600 Series DSUs with the 2500
and 2600 Series devices supports
a smooth transition to an all
3600 Series network.
Table 1-4 lists the diagnostic capabilities supported by
a 3600 Series DSU communicating with another device.
In each combination of equipment, the Model 3610 and
3611 DSUs can be either the control or the tributary.
Table 1-4

Diagnostic Compatibilities

Diagnostics Supported
Enhanced 3600 Disruptive diagnostics (2500, 2600, 3600s,
3600e, Br56), Nondisruptive, NonD, Mixed
2600 diagnostics
2600 diagnostics (If there is a control 2600 DSU with a
tributary 3600 DSU, the tributary must be set up as a
2600 DSU in the NMS device profile.)
2500 diagnostics on a point-to-point network; no diagnostics
on a multipoint network (primary channel compatibility only)
No diagnostics (primary channel compatibility only)
No diagnostics (primary channel compatibility only)
July 1999
Introduction
NOTE
1-9