C-8 Point-To-Point Dial Backup Progress Messages - Paradyne COMSPHERE 3610 Operator's Manual

Dial Backup Messages
The following messages only appear when a dial
backup module (DBM) is installed. Table C-8 lists the
progress messages that appear when a point-to-point call
is being placed, while Table C-9
messages.
Message
DBM:Answering
DBM:Callback
DBM:Connected
DBM:Disabled
DBM:FoundAnswTon
DBM:Ringing
DBM:Standby
DBM:Starting Up
DBM:Wait Callbck
DBM:WaitForAnswr
DBM:WaitForSync
DBM:xxxxxxxxxxx
3610-A2-GB91-90
lists possible error
Table C-8
Point-to-Point Dial Backup Progress Messages
DBM is answering an incoming call.
Callback sequence initiated.
Connected.
No calls can be initiated or answered.
A 4-wire Switched 56 DBM is answering an incoming call.
Ringing at remote DBM or external dial modem.
A connection is made but the digital circuit is still the active link.
Training for synchronization.
Expecting callback from remote DBM.
Call placed and waiting for connection.
Call placed and waiting for connection (2-wire Switched 56 DBM only).
The last 11 digits for the telephone number dialed.
July 1999
Diagnostic Control Panel Messages Reference
Condition
C-11