Status Branch; Status Branch Menu Selections - Paradyne COMSPHERE 3610 Operator's Manual

COMSPHERE 3600 Series Data Service Units
Each selection leads to a functional subbranch of the
menu tree. Keep in mind when operating a DSU that five
factors determine what selections or configuration options
are available:
Whether the DSU is in Display mode only.
Whether the DSU is a control or tributary.
Whether selections are from the Local or Remote
branch (operating in Local or Remote mode).
Whether a DBM is installed.
Whether a TDM or MCMP circuit card is installed.
Except where specifically noted, the discussion of each
subbranch stemming from the Local branch menu applies
equally to a control or a tributary DSU.
NOTE
When any required menu item is
not displayed, press the
key to scroll menu selections into
view. In most examples, additional
menu selections are shown
beneath the display.

Status Branch

The Status (Stat) branch reports on the health and
status of the DSU, as well as a DBM, TDM or MCMP, if
installed, the DTE interface, the quality of the PSTN
connection, the identity of the DSU (model number, serial
number, etc.), and the terminal's power (checks the
presence of voltage on the DTE's request-to-send lead).
Port Select only applies to TDM or MCMP applications.
4-8
or
The Status branch menu has five selections if a DBM is
installed, or four selections without a DBM. Table 4-2
lists the selections on the Status branch menu.
Menu Selection
H/S
DTE
CircQ
ID
TPwr
1
Available only if a V.32 DBM is installed.
July 1999
Table 4-2

Status Branch Menu Selections

Report Requested
Health and Status
DTE Leads Status
1
Circuit Quality
Identity
Report Terminal Power
3610-A2-GB91-90