Antistream - Paradyne COMSPHERE 3610 Operator's Manual

COMSPHERE 3600 Series Data Service Units
ENTER Desired Input, <CR> to complete:

AntiStream

AntiStream is a configuration option with a timer that
can be set from 1 to 100 seconds. At the DCP, Disable is
also an option. At the async terminal, AntiStream is
disabled by entering 0 (zero) instead of selecting Disab.
To access antistreaming without a MUX, select
Confg, Opts, Activ, and Gen. If MUX is configured,
select Confg, Opts, Activ, MUX, and Prtn. To disable or
set the amount of time for antistreaming:
D-12
Customer ID: SITER170 Model: COMSPHERE 3610
Pswrd:
Figure D-13. Password Input Screen
July 1999
C t r l – T = Top Menu
C t r l – U = Up Menu
C t r l – x = Disconnect
"
Procedure
1. Access the AntiStream Menu screen
(Figure D-14). The current setting is displayed at
the top of the screen. To change the current
value:
PRESS: 2 – Chang
2. The AntiStream input screen appears
(Figure D-15).
3. Enter the number of seconds or zero to disable
and press the carriage return < CR>. The
AntiStream Menu screen reappears with the
altered value displayed
For further information on antistreaming, refer to
Table 6-6, General Configuration
(Figure D-14).
Options, in Chapter 6.
3610-A2-GB91-90