Messages Branch - Paradyne COMSPHERE 3610 Operator's Manual

Messages Branch

The Messages (Msgs) branch of the top-level menu
allows the DSU to receive messages from the NMS and
only displays when a message is waiting. This branch is
available to a DSU configured either as a control or a
tributary, and is selected by pressing the F3 key.
When selected, the message can be read or cleared.
Once cleared, the Msgs selection no longer appears.
3610-A2-GB91-90
Reading a Message
The OK indicator flashes two times per second if a
message is waiting. You can read messages at the local
DSU by selecting Read.
Messages:
Read
F1
Press the F1 key to select Read.
If the message is less than 16 characters from
beginning to end, the entire message appears. If the
message is greater than 16 characters, use the
key to scroll additional lines of the message onto the
display. The direction of the arrow indicates the direction
of the scroll. If less than 16 characters, the entire message
appears.
Clearing a Message
You can clear (delete) messages that are received at the
local DSU by selecting Clear. Press the F2 key to select
Clear.
Press the key to return to the top-level menu.
July 1999
DSU Operations
Clear
F3
F2
or
4-39