F-8 Nms Adapter Cable Pin Assignments - Paradyne COMSPHERE 3610 Operator's Manual

EIA 25-pin Modular
1
plug End Plug End
2
1 6
11 4
14 3
16 5
19 2
23 1
1
All other pins on the 25-pin plug connector are wired straight through to the 25-pin socket connector.
2
This pin only functions as a +12 Vdc source when Jumper 21 is in the LEFT position.
3610-A2-GB91-90
Figure F-6. NMS Adapter Cable (3000-F2-510)
Table F-8
NMS Adapter Cable Pin Assignments
NMS Alarm
Function (Jumper J20
positioned Right)
+12 Vdc Source
Signal Ground
Unused Output from DSU
Unused Output from DSU
Fan Status Alarm Input to DSU
Power Status Alarm Input to DSU
July 1999
Diagnostic Channel (DC OUT)
Function (Jumper J20
positioned Left)
N/C
Signal Ground
Secondary Receive Data to DSU
Secondary Transmit Data from DSU
Data Signal Rate Selector II – DTE Source
Data Signal Rate Selector I – DTE Source
Pin Assignments
F-9