Bit Error Rate Test - Paradyne COMSPHERE 3610 Operator's Manual

Displ. To clear the results of the test and reset the counters
to zero, press F2 to select Clr.
Results
When the message Command Complete is displayed,
any key except the key returns you to the Bit Error
Rate Test submenu, where the Displ and Clr selections
cause the following to be displayed:
DSU BERT: Active
Time:
F1 F2
3610-A2-GB91-90
Figure 4-11. Bit Error Rate Test
0:01:26
F3
July 1999
DSU BERT: Active
Tot Error:
F1 F2
DSU BERT: Active
Err Secs:
F1 F2
If the test is aborted, the top line of this display shows
Final instead of Active. Table 4-8
displayed after a Bit Error Rate Test has been completed.
DSU Operations
1017
F3
1
F3
defines the information
4-27