Password Change - Paradyne COMSPHERE 3610 Operator's Manual

Password Change

Password security protects access to the DSU. When
password security is already set up at the DCP, the
password must be entered at the async terminal exactly
as originally input, including upper- or lowercase alpha
characters (e.g., if you entered 234abc originally,
entering 234ABC would not be accepted as a valid
password).
To set up or change the password:
"
Procedure
1. Select Pswrd from the Async Terminal Menu
screen (Figure D-8); the Password Menu Screen
appears (Figure D-12).
PRESS: 1 – Chang
2. The Password input screen appears
(Figure D-13). The password can be up to 8
characters. Valid password characters include:
Alpha characters a to z; upper- or lowercase
Numeric 0 to 9
1 – Chang
2 – Save
PRESS Desired Selection Key
3610-A2-GB91-90
Customer ID: SITER170 Model: COMSPHERE 3610
Term Pswrd:
Figure D-12. Password Menu Screen
July 1999
Characters:
# (pound sign)
- (dash)
. (period)
/ (backslash)
If an invalid password character is entered, the
entry is ignored. If the terminal is set up for
sound, the terminal beeps when there is an
invalid entry.
3. After entering the desired password, press the
carriage return < CR>. The Password Menu
screen appears (Figure D-12).
PRESS: 2 – Save
The confirmation message Command Complete
appears after saving the password to memory.
T/ C t r l – T = Top Menu
U/C t r l – U = Up Menu
C t r l – x = Disconnect
Async Terminal Operation
D-11