Settings - Dürkopp Adler D867 e-con Service Instructions Manual

Programming
Calibration of Teach Transmission
To calibrate the position of the pedal:
1. Comply with the instructions on the control panel and operate the hand-
Calibration of the Reference position
To calibrate the position of the pedal:
1. Comply with the instructions on the control panel and turn the hand-
2. Press Next.
 Calibration complete.
3. Remove the locking peg.
4. Click on Close.

19.8.2 Settings

The Settings parameter is not explained in greater detail here, because
it is closely related to the area of the mechanics. Details on that area can
be found in the Service routine chapter ( p. 14) .
Icon
Service Instructions D867 e-con - 00.0 - 08/2023
wheel in the direction of rotation until the calibration is complete.
wheel to the lock position and stake out with pin ( p. 32).
Menu item
Feed dog
Hook-Needle
Sewing foot stroke
Value range
Assemble
Position to needle
Feed dog movement
Timing
Needle bar
Equal sewing foot stroke
Feed Move
187