Table of Contents
Advertisement
Performing the basic settings of the eccentrics
Adjusting the eccentric for the sewing foot stroke
Fig. 27: Adjusting the eccentric for the sewing foot stroke
(7) - Control cam
(8) - Screw
(9) - Screw
To adjust the eccentric for the sewing foot stroke:
Depending on the seam program, the control cam will come to a stop at
the set stroke height.
12. Switch on the machine.
13. Open the menu
14. Switch off the machine.
15. Manually press the control cam (7) into the end position.
16. Loosen screws (8) and (9).
17. Lock the machine in place at the looping stroke position ( p. 32).
18. Tighten the first screw (9) in the direction of rotation.
19. Remove the lock.
20. Turn the eccentric and tighten the screw (8).
Service Instructions D867 e-con - 00.0 - 08/2023
Parameters > Additional values (+)
and set the sewing foot stroke to the smallest stroke of 0.5 mm.
⑦
⑧
⑨
⑩
(10) - Slot
(11) - Slot
⑪
39
Advertisement
Table of Contents
