Table of Contents
Advertisement
Working basis
4.2 Sequence of the settings
Observe the
The setting positions for the sewing machine are interdependent.
sequence!
Always adhere to the specified sequence for the individual setting steps.
Always observe all information on requirements and following settings
marked at the side with
4.3 Cable routing
Ensure that all cables in the machine are laid such that moving parts are
Tying the cable
together
not impaired in their ability to function correctly.
1. Lay any excess cabling neatly in proper cable snakes.
2. Tie the snakes together using a cable tie.
3. Cut off any protruding part of the cable tie.
Service manual H867 Version 00.0 - 08/2013
ATTENTION
Machine damage due to incorrect sequence
Always adhere to the working sequence specified in this man-
ual.
If possible, bind the snakes to fixed parts.
The cables must be fixed firmly in place.
ATTENTION
Machine damage and malfunctions can be caused by laying the
cables incorrectly.
Excess cabling may obstruct moving machine parts in their ability to
function correctly. This will affect the sewing function and may cause
damage.
Lay excess cabling as described above.
.
9
Advertisement
Table of Contents
