Dürkopp Adler D867 e-con Service Instructions Manual page 242

9971
9972
9973
9974
9975
9976
9977
9978
9979
9980
9981
240
Code Type Meaning
Warning The thread tension value does not
change. The thread may be broken or
the connection to the sensor is lost.
Warning Scan required
Warning Another scan required
Warning Scan again as RFID tags did not
match
Warning Scan canceled
Information Daily piece counter reached
Warning Switch off collision protection
Information • Poka Yoke Function 1
Information • Poka Yoke Function 2
Information • Poka Yoke Function 3
Information • Poka Yoke Function 4
Troubleshooting
Corrective
• The thread tension value does not
change. The thread may be broken
or the connection to the sensor is
lost.
• Please scan the RFID tag
• Please scan the same RFID tag
again
• Please scan the same RFID tag as
before
• Please scan the same RFID tag
again
• Daily piece counter reached
• Attention: The electronic edge
guide is protected by safety zones
to prevent collisions. By activating
this function, you are switching off
this collision protection. There is an
increased risk of the edge guide
colliding with other components of
the machine.
The system is waiting for a release
of Poka Yoke Function 1.
The system is waiting for a release
of Poka Yoke Function 2.
The system is waiting for a release
of Poka Yoke Function 3.
The system is waiting for a release
of Poka Yoke Function 4.
Service Instructions D867 e-con - 00.0 - 08/2023