Table of Contents
Advertisement
Fig. 47: Adjusting the sewing foot lifting gear (1)
(1) - Cover
To set the lifting gear of the sewing foot:
1. Switch off the machine.
2. Disassemble the handwheel.
3. Disassemble the toothed belt cover ( p. 23).
4. Disassemble the arm cover ( p. 19).
5. Disassemble the front cover ( p. 20).
6. On 2-needle machines: Pull off the plug (2) at the cover (1) of the PCB.
7. Remove the cover (1) from the PCB.
Fig. 48: Adjusting the sewing foot lifting gear (2)
(3) - PCB
8. Loosen all plugs from the PCB (3).
9. Remove the PCB (3) CAREFULLY.
64
While doing so, press the spacers (4) together individually (using a
suitable tool if necessary) and lift the PCB (3) gradually.
①
(2) - Plug
③
④
(4) - Spacer
Service Instructions D867 e-con - 00.0 - 08/2023
Sewing feet
②
Advertisement
Table of Contents
