Setting The Program Defaults - Dürkopp Adler D867 e-con Service Instructions Manual

19.5 Setting the Program defaults

Customer-specific settings can be made here, which are automatically
used as preset values for the first seam section during the creation of a
new program. Select the values so that they can be retained for as many
programs as possible.
Menu items in the Program defaults
Icon
Stitch functions
162
Menu item
Stitch length default
Sewing foot pressure default
Needle thread tension default
Sewing foot stroke
Bartack at seam begin
Bartack at seam end
Thread trimmer
Daily piece counter
Count stitches
Service Instructions D867 e-con - 00.0 - 08/2023
Programming
Value range
• Value range
0.0 – 6.0 [mm]
(depending on sewing
equipment and
subclass)
• Value range
01 - 20
• Value range
01 - 99 [%]
• Value range
1.0 – 9.0 [mm]
• Value range
On/Off
• Value range
On/Off
• Value range
On/Off
Counter Mode
• Value range
Off/Up/Down
Reset
Enter the value to which
the daily piece counter
is set when a reset is
performed.
• Value range
-999 - 999
• Value range
On/Off