Table of Contents
Advertisement
Working basis
3
3.1 Order of the settings
Order
The setting positions for the sewing machine are interdependent.
Always comply with the order of individual setting steps as specified.
It is absolutely essential that you follow all notices regarding prerequisites
and subsequent settings that are marked with
3.2 Laying the cables
To lay the cables:
1. Lay any excess cabling neatly in proper cable snakes.
2. Bind together the cable loops with cable ties.
Important
Tie loops wherever possible to fixed parts. The cables must be secured
firmly.
3. Cut off any overlapping cable ties.
Service Instructions 1767 - 00.0 - 12/2016
Working basis
NOTICE
Property damage may occur!
Risk of machine damage from incorrect order.
It is essential to follow the working order specified in these
instructions.
NOTICE
Property damage may occur!
Machine damage and malfunctions can be caused by laying the
cables incorrectly.
Excess cables can impair the functioning of moving machine parts.
This impairs the sewing function and can result in damage.
Lay excess cable as described in these instructions.
in the margin.
13
Advertisement
Table of Contents
