Table of Contents
Advertisement
5.21.2 Default settings
You define the following default settings on each of the different displays
of the Label Creator:
Input field
small bar
wide bar
Pos X
Pos Y
Orientation
Font size
5.21.3 Adjusting the end label size
Fig. 187: Opening the toolbox (2)
To adjust the size of a new end label:
1. Click on the Edit menu item.
2. Click on Label dimensions.
The display switches to:
192
Function
Widen/narrow the black and white
spaces for 1D barcodes
Move content to the left/right
Move content up/down
Define the orientation of the content
on the end label (e.g. horizontal/ver-
tical). 0 is the basic horizontal set-
ting. The numbers 90, 180 and 270
represent a clockwise rotation of the
content by 90° each. p. 166
Enter the font size in pixels. 30 pix-
els correspond to a font size of
approx. 3 mm on the End label
display. p. 167
Adjust setting
Enter new values.
Recommendation: Adopt
presettings.
Enter a new value.
Enter a new value.
Select the desired value.
Enter the desired value.
Operating Instructions 550-D800 - 01.0 - 05/2023
Programming
Advertisement
Table of Contents
