Assembling The Sewing Motor - Dürkopp Adler D867 e-con Service Instructions Manual

Fig. 95: Disassembling the sewing motor (5)
(5) - Support plate
(7) - Motor
13. Pull off the toothed belt wheel (8).
14. Loosen the screws (10) on the support plate (5).
15. Pull off the motor (7) and replace it with a new one ( p. 112).

18.3 Assembling the sewing motor

112
⑤
NOTICE
Property damage may occur!
Possible damage to the PCB.
Make sure the toothed belt runs straight and along the center of
the toothed belt wheels.
⑩
⑩
(8) - Toothed belt wheel
(10) - Screws
Service Instructions D867 e-con - 00.0 - 08/2023
Sewing motor
⑦
⑧