Disassembling And Assembling The Toothed Belt Cover - Dürkopp Adler D867 e-con Service Instructions Manual

Working basis

3.4.6 Disassembling and assembling the toothed belt cover

Toothed belt cover with handwheel cover
Fig. 11: Toothed belt cover with handwheel cover (1)
(1) - Screws
To disassemble the toothed belt cover:
1. Loosen the screws (1).
2. Remove the toothed belt cover (2); start by disassembling the cover
Fig. 12: Toothed belt cover with handwheel cover (2)
(3) - Plates
Service Instructions D867 e-con - 00.0 - 08/2023
①
Disassembling the toothed belt cover
from below.
(2) - Toothed belt cover
③
②
23