Thread Trimmer (Fa); Adjusting The Height Of The Thread-Pulling Knife - Dürkopp Adler D867 e-con Service Instructions Manual

13 Thread trimmer (FA)

13.1 Adjusting the height of the thread-pulling knife

Fig. 64: Adjusting the height of the thread-pulling knife
(1) - Counter blade
(2) - Thread-pulling knife
(3) - Threaded pin
(4) - Lever
78
WARNING
Risk of injury from sharp parts!
Cutting injuries may be sustained.
Switch off the machine before adjusting the thread
trimmer.
WARNING
Risk of injury from moving parts!
Crushing possible.
Switch off the machine before adjusting the thread
trimmer.
①
②
③
④
Thread trimmer (FA)
(5) - Screw
(6) - Hook bearing
(7) - Set collar
Service Instructions D867 e-con - 00.0 - 08/2023
③
⑦
⑥
⑤