Table of Contents
Advertisement
Programming
19.10 Performing a software update
When a new software version is available, it can be downloaded from
Dürkopp Adler's software shop (https://software.duerkopp-adler.com/
maschinenprogramme.html) and be uploaded from a USB key. All settings
on the machine are retained.
To perform a software update:
1. Download the latest software version from Dürkopp Adler's website.
2. Save the software to a USB key.
3. Connect the USB key at the control panel.
4. Press the
Fig. 135: Performing a software update
5. Use the slider control to select USB as the source for the update:
6. Select the desired update file.
The software update is performed.
7. Remove the USB key when the software update is complete.
The machine restarts and is ready for sewing.
Service Instructions D867 e-con - 00.0 - 08/2023
Software update button.
• Slider control left: USB
• Slider control right: QONDAC
203
Advertisement
Table of Contents
