Disassembling And Assembling The Throat Plate - Dürkopp Adler D867 e-con Service Instructions Manual

Working basis

3.5 Disassembling and assembling the throat plate

Fig. 18: Disassembling and assembling the throat plate
(1) - Screws
(2) - Throat plate
Disassembling the throat plate
To disassemble the throat plate:
1. Execute the service routine Feed dog > Position to
 The software is used to define the necessary presettings on
2. Press the Service Stop button.
3. Open the throat plate slide ( p. 28).
4. Loosen the screws (1).
5. Disassemble the throat plate (2).
6. Finish the service routine.
Assembling the throat plate
To assemble the throat plate:
1. Execute the service routine Feed dog > Position to
 The software is used to define the necessary presettings on
2. Press the Service Stop button.
3. Insert the throat plate (2).
 Ensure that the nose (4) of the bobbin case (3) is in the cutout of
4. Tighten the screws (1).
5. Close the throat plate slide ( p. 28).
6. Finish the service routine.
Service Instructions D867 e-con - 00.0 - 08/2023
①
②
③
needle ( p. 14).
the machine.
needle ( p. 14).
the machine.
the throat plate (2).
(3) - Bobbin case
(4) - Nose
④
29