Setting The Module Management Parameters - Dürkopp Adler D867 e-con Service Instructions Manual

Programming
It is possible to define additional settings for the interface. The possibilities
are explained in more detail in the table.
Icon
BDE

19.4.32 Setting the Module management parameters

You can make changes to the configuration and the allocation of the
inputs and outputs both at the DAC Flex control and at input and output
modules 1 and 2.
If connected correctly, any additional modules or PCBs, e.g. the stepper
motor module, will appear for checking under Module management.
Fig. 108: Module management
Service Instructions D867 e-con - 00.0 - 08/2023
Menu items
Mode
Baudrate
Transmission rate of the scanner
Value range
• Value range
Off/Scanner
• Value range
009600 -
250000 [Bits/s]
157