Table of Contents
Advertisement
Programming
19.2.4 Login with file on USB key
You cannot assign this function under User Management until it has been
activated in the machine configuration.
To allow login with a file stored on a USB key:
1. Log in by entering technician and 25483 for username and pass-
2. Open the burger menu and go to Settings - Machine configuration
3. The Authentication methods interface opens.
4. Activate the slider control Allow login with file on USB key.
5. A warning opens.
6. Confirm with OK.
7. You can assign this function under User Management.
8. Press
Assigning file on USB key to a user
To assign a file stored on a USB key to a user:
1. Create a new user under User Management ( p. 165).
2. Activate the item Login with username and password.
3. Press Edit and assign a username and password.
4. Press the item Login with file on USB key.
A new window opens.
5. Plug the USB key holding the file into one of the ports on the control
6. Select the USB key you wish to assign to the user for login purposes.
7. To assign the USB key, press Pair.
The window disappears, and the function Login with file on
Information
Once the user with the assigned file stored on a USB key has been created
on every machine, login will be possible with a copy of the file stored on any
USB key.
Service Instructions D867 e-con - 00.0 - 08/2023
word.
to select the button Authentication methods (
to return to Machine configuration or
Manual mode.
panel.
USB key is active.
p. 125).
to return to
121
Advertisement
Table of Contents
