Dürkopp Adler D867 e-con Service Instructions Manual page 26

To assemble the toothed belt cover:
1. Place the toothed belt cover (2); start by placing the plates (3) first.
2. Tighten the screws (1).
Toothed belt cover with large handwheel
Fig. 13: Toothed belt cover with large handwheel (1)
(1) - Screws
(2) - Toothed belt cover
To disassemble the toothed belt cover:
1. Loosen screws (5) on the handwheel (4).
2. Remove the handwheel (4).
3. Loosen the screws (1).
4. Remove the toothed belt cover (2); start by disassembling the cover
24
Assembling the toothed belt cover
①
Disassembling the toothed belt cover
from below.
⑤ ④
(4) - Handwheel
(5) - Screws
Service Instructions D867 e-con - 00.0 - 08/2023
Working basis
②