Dürkopp Adler D867 e-con Service Instructions Manual page 113

Sewing motor
Fig. 93: Disassembling the sewing motor (3)
(4) - Screws
(5) - Support plate
9. Trace the cables (6) from the motor (7) to the control and pull the plug
10. Loosen the screws (4) on the support plate (5).
11. Remove the support plate (5) together with the motor.
Fig. 94: Disassembling the sewing motor (4)
(8) - Toothed belt wheel
12. Loosen the threaded pin (9) on the toothed belt wheel (8).
Service Instructions D867 e-con - 00.0 - 08/2023
④
out of the control.
⑤
(6) - Cable
(7) - Motor
⑨
⑧
(9) - Threaded pin
⑦
⑥
111