Dürkopp Adler D867 e-con Service Instructions Manual page 115

Sewing motor
Fig. 96: Assembling the sewing motor (1)
(1) - Support plate
(2) - Screws
(3) - Toothed belt wheel
To assemble the sewing motor:
1. Attach the motor (4) to the support plate (1) using 4 screws (2).
2. Fit the toothed belt wheel (3).
Fig. 97: Assembling the sewing motor (2)
(3) - Toothed belt wheel
(4) - Motor
3. Tighten the toothed belt wheel (3) using the threaded pin (6) and check
4. Lay the cables (5) from the motor (4) through the tabletop and insert
Service Instructions D867 e-con - 00.0 - 08/2023
①
Make sure that the cables (5) are on the outside.
④
for smooth movement.
the plugs into the marked slots on the control.
②
②
(4) - Motor
(5) - Cables
⑥
③
⑤
(5) - Cable
(6) - Threaded pin
⑤
④
③
113