Table of Contents
Advertisement
Icon
128
Menu items
Turn back
Reversal after cutting the thread is active or
inactive.
Needle position after turn back
Position of the needle after thread cutting
(reversal position); the needle is set upward to
reach the full lifting height, and the thread
lever is then no longer at top dead center.
Needle thread tension open
Needle position at which the needle thread
tension switches to the value for thread
cutting.
Needle thread tension close
Position at which the standard needle thread
tension is used again after thread cutting.
Needle thread tension
Thread trimmer
Needle thread tension during thread cutting
t needle thread tension
Thread trimmer
Delay, showing how long it takes until the
standard needle thread tension is used again.
Short stitches
Value range
• Value range
On/Off
• Value range
000 - 359 [°]
• Value range
000 - 359 [°]
• Value range
000 - 359 [°]
• Value range
00 - 50 [%]
• Value range
000 – 200 [ms]
Number of short
stitches at seam
begin
• Value range
00 - 99 [stitches]
Number of short
stitches at seam
end
• Value range
00 - 99 [stitches]
Stitch length
• Value range
-12.0 – 12.0 [mm]
recommended
value range:
0.1 – 1.5 [mm]
Service Instructions D867 e-con - 00.0 - 08/2023
Programming
Advertisement
Table of Contents
