Dürkopp Adler D867 e-con Service Instructions Manual page 27

Working basis
To assemble the toothed belt cover:
1. Place the toothed belt cover (2); start by placing the plates (3) first.
2. Tighten the screws (1).
Fig. 14: Toothed belt cover with large handwheel (4)
(6) - Centering pin
3. Place the handwheel (4), making sure that the centering pin (6) is
4. Tighten the screws (5).
Service Instructions D867 e-con - 00.0 - 08/2023
Assembling the toothed belt cover
⑥
positioned correctly (otherwise, referencing by the hall sensor will not
work properly).
25