Working basis
3.4 Disassembling and assembling the covers
For many types of adjustment work, you will have to disassemble the
machine covers first in order to access the components.
This chapter describes how to disassemble and then assemble the
individual covers again. The text for each type of adjustment work then
specifies only the cover that needs to be disassembled at that particular
time.
Information
Always apply 1 Nm of tightening torque when tightening the screws that
are used to attach the covers.
Service Instructions D867 e-con - 00.0 - 08/2023
WARNING
Risk of injury from moving parts!
Crushing possible.
Move the machine to the service position or switch
the machine off before disassembling the covers.
WARNING
Risk of injury from sharp parts!
Puncture possible.
Move the machine to the service position or switch
the machine off before disassembling the covers.
17