Maintenance
20.4 Servicing specific components
20.4.1 Cleaning the thread clamp
Cleaning the thread clamp
Fig. 142: Cleaning the thread clamp (1)
(1) - Spring
(2) - Screw
To clean the thread clamp:
1. Loosen the screw (2).
2. Disassemble the thread clamp (3).
Important
Make sure not to lose the spring (1).
3. Blow out the magnet (4) using a compressed air gun.
4. Check the thread clamp (3) for sharp edges.
If the thread clamp (3) has sharp edges:
5. Polish or change the thread clamp (3).
6. Assemble and align the thread clamp ( p. 214).
Service Instructions D867 e-con - 00.0 - 08/2023
①
②
③
(3) - Thread clamp
(4) - Magnet
④
213