Fig. 86: Changing the lower toothed belt (2)
(10) - Tensioning roller
(11) - Toothed belt
(12) - Toothed belt cover
10. Tilt the machine head.
11. Disassemble the toothed belt cover (12).
12. Erect the machine head.
13. Loosen the screw (14) on the tensioning roller (10).
The toothed belt tension is slack.
14. Remove the tensioning roller (10).
15. Remove the toothed belt (13).
16. Tilt the machine head.
17. Remove the toothed belt (11).
106
⑪
⑫
Make sure not to lose the washer.
⑩
⑭
⑬
(13) - Toothed belt
(14) - Screw
Service Instructions D867 e-con - 00.0 - 08/2023
Toothed belt