Table of Contents
Advertisement
Thread trimmer (FA)
Setting the knife end position
11. Loosen the clamping screw (8).
Fig. 66: Adjusting the cutoff curve (2)
(9) - Screw
(10) - Counter blade
(11) - Thread-pulling knife
(12) - Marking End position
12. Turn the thread-pulling knife (11) so that the marking End position (12)
13. Tighten the clamping screw (7) on the lever (7) such that the lever (8)
14. Loosen the threaded pins (3).
15. Push the set collar (2) to the right as far as it will go and against
16. Check the looping stroke position ( p. 54).
17. Tighten the threaded pins (3).
Service Instructions D867 e-con - 00.0 - 08/2023
⑨
⑩
⑪
⑫
is exactly next to the tip of the counter blade (10).
has no axial play.
the control cam (4).
(13) - Screw
(14) - Hook thread clamp
(15) - Screw
⑮
⑭
⑬
81
Advertisement
Table of Contents
