Dürkopp Adler D867 e-con Service Instructions Manual page 39

Performing the basic settings of the eccentrics
Cover
Adjusting the eccentric for the feed dog lift
Fig. 25: Adjusting the eccentric for the feed dog lift
(1) - Slot
(2) - Slot
To adjust the eccentric for the feed dog lift:
1. Switch off the machine.
2. Lock the machine in place ( p. 32).
3. Switch on the machine.
4. Press the Service Stop button.
5. Tilt the machine head.
6. Loosen the screws (3).
7. Turn the eccentric such that slot (1) lines up with slot (2).
8. Tighten the screws (3).
Service Instructions D867 e-con - 00.0 - 08/2023
• Disassemble the front cover ( p. 20)
• Disassemble the arm cover ( p. 19)
①
③
②
(3) - Screws
37