Table of Contents
Advertisement
Sewing motor
7. Fit the tensioning roller (9).
8. Use a wrench to tension the tensioning roller (9).
It should not be possible to twist the toothed belt more than 45°.
9. Tighten the screw (10).
10. Assemble the toothed belt cover with large handwheel ( p. 24).
Service Instructions D867 e-con - 00.0 - 08/2023
Make sure the centering pin is seated correctly on the handwheel,
as the hall sensor will otherwise not be able to complete referencing
properly.
115
Advertisement
Table of Contents
