Dürkopp Adler D867 e-con Service Instructions Manual page 161

Programming
Mode
DB2000
Function module 1 - 8
Sewing light
Machine head light
Sewing foot lift
2
Fullness deactivation
Needle thread monitor (right/left)
Needle thread identification (right/left)
Bobbin thread identification
Housing for cones
Status of the camera
Bobbin winder lever
Bobbin cover scanner (right/left)
Segment abort
Bobbin thread monitor
Edge Guide Check Up/Down
Left needle bar
Right needle bar
Automatic stitch length adjustment
Poka yoke 1-4 result
Short stitch
Each input can be switched to stored or not stored.
Service Instructions D867 e-con - 00.0 - 08/2023
nd
position sewing foot lift
Explanation/reference
 p. 133

p. 155/Operating Instructions
Operating Instructions/ p. 163
Operating Instructions/ p. 163
Operating Instructions/ p. 135
 p. 142
Enabling of sewing by the camera if image
quality is sufficient
Input simulates the flipping of the bobbin
lever
Bobbin winding process starts
Input for the bobbin cover
triggers the scan for identifying the bobbin
Input for the bobbin thread monitor
Operating Instructions
159