HPE ProLiant DL385 Gen11 Maintenance And Service Manual page 97

Results Results
To replace the component, reverse the removal procedure.
Removing and replacing the serial port Removing and replacing the serial port
Prerequisites Prerequisites
Before you perform this procedure, make sure that you have a hex screwdriver available.
About this task About this task
CAUTION: CAUTION:
A discharge of static electricity from a finger or other conductor might damage system boards or other static-sensitive
devices. To prevent damage, observe antistatic precautions.
CAUTION: CAUTION:
The port blank provides EMI shielding and helps maintain proper thermal status inside the server. Do not operate the server
when a port blank is removed without the corresponding I/O port option installed.
Procedure Procedure
1. Back up all server data.
2. Power down the server.
3. If installed, open the cable management arm.
HPE ProLiant DL385 Gen11 Server Maintenance and Service Guide 97