Table of Contents
Advertisement
Prerequisites
Prerequisites
Before you perform this procedure, make sure that you have a spudger or any small prying tool available.
About this task
About this task
CAUTION:
CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless all bays are populated with
either a component or a blank.
Procedure
Procedure
1. If installed, remove the front bezel .
2. Power down the server.
3. If installed, open the cable management arm.
4. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
5. Disconnect all peripheral cables from the server.
6. Remove the optical drive blank.
LFF universal media bay
HPE ProLiant DL385 Gen11 Server Maintenance and Service Guide
101
Advertisement
Table of Contents
