HPE ProLiant DL385 Gen11 Maintenance And Service Manual page 293

Slot number Slot number Location Location
1 Primary riser cage
2
3
4 Secondary riser cage
5
6
Six-slot riser configuration with the tertiary riser cage Six-slot riser configuration with the tertiary riser cage
Slot number Slot number Location Location
7 Tertiary riser cage
8
Drive bay numbering Drive bay numbering
Drive bay numbering depends on how the drive backplanes are connected:
To a controller:
Type-o controllers install to OCP slot 21.
Type-p controllers install to a PCIe riser.
Subtopics Subtopics
SFF drive bay numbering SFF drive bay numbering
LFF drive bay numbering LFF drive bay numbering
E3.S drive bay numbering E3.S drive bay numbering
GPU configuration drive bay numbering GPU configuration drive bay numbering
SFF drive bay numbering SFF drive bay numbering
The following drive backplane options are supported in SFF drive configurations:
Front-end: 2 SFF, side-by-side (LFF chassis only)
Description Description Supported form factors Supported form factors
Stacking riser
Full-height, half-length
Stacking
Half-height, half-length (low-profile)
Base riser
Stacking riser
Stacking riser
Base riser
Supported form factors Supported form factors
Full-height, half-length
Half-height, half-length (low-profile)
HPE ProLiant DL385 Gen11 Server Maintenance and Service Guide 293