HPE ProLiant DL385 Gen11 Maintenance And Service Manual page 174

a. Remove the universal media bay screws (callout 1).
b. Remove the universal media bay from the server (callout 2).
15. Remove the 2 SFF stacked drive backplane:
a. Remove the backplane screws (callout 1).
b. Remove the backplane from the drive cage (callout 2).
Results Results
To replace the component, reverse the removal procedure.
Removing and replacing the midplane drive backplane Removing and replacing the midplane drive backplane
Prerequisites Prerequisites
Before you perform this procedure, make sure that you have a T-15 Torx screwdriver available.
About this task About this task
HPE ProLiant DL385 Gen11 Server Maintenance and Service Guide 174