Table of Contents
Advertisement
16. Remove the risers from the tertiary riser cage.
17. Detach the free-height riser and the stacking riser.
Results
Results
To replace the component, reverse the removal procedure.
Removing and replacing the free-height riser
Removing and replacing the free-height riser
Prerequisites
Prerequisites
Before you perform this procedure, make sure that you have a T-15 Torx screwdriver available.
About this task
About this task
CAUTION:
CAUTION:
A discharge of static electricity from a finger or other conductor might damage system boards or other static-sensitive
devices. To prevent damage, observe antistatic precautions.
HPE ProLiant DL385 Gen11 Server Maintenance and Service Guide
157
Advertisement
Table of Contents
