HPE ProLiant DL385 Gen11 Maintenance And Service Manual page 255

Installing the system board assembly Installing the system board assembly
Prerequisites Prerequisites
Before you perform this procedure, make sure that you have the following items available:
T-20 Torx screwdriver
Hex screwdriver
Thermal grease (spare part number: 777298-001)
About this task About this task
CAUTION: CAUTION:
A discharge of static electricity from a finger or other conductor might damage system boards or other static-sensitive
devices. To prevent damage, observe antistatic precautions.
Procedure Procedure
1. Install the new system board assembly:
a. Install the system board assembly in the chassis (callout 1).
b. Tighten the system board captive screw (callout 2).
HPE ProLiant DL385 Gen11 Server Maintenance and Service Guide 255