Table of Contents
Advertisement
Results
Results
To replace the component, reverse the removal procedure.
Removing and replacing the secondary three-slot riser cage bracket
Removing and replacing the secondary three-slot riser cage bracket
About this task
About this task
CAUTION: For proper cooling, do not operate the server without the access panel, baffles, expansion slot covers, or blanks
CAUTION:
installed. If the server supports hot-plug components, minimize the amount of time the access panel is open.
Before you perform this procedure, make sure that you have a T-10 Torx screwdriver available.
Procedure
Procedure
1. Power down the server.
2. If installed, open the cable management arm.
HPE ProLiant DL385 Gen11 Server Maintenance and Service Guide
141
Advertisement
Table of Contents
