HPE ProLiant DL385 Gen11 Maintenance And Service Manual page 133

10. If an expansion card with internal cables is installed on the riser, disconnect the cables from the card.
11. Remove the expansion card.
Results Results
To replace the component, reverse the removal procedure.
Removing and replacing the GPU from the front GPU riser cage Removing and replacing the GPU from the front GPU riser cage
Prerequisites Prerequisites
Before you perform this procedure, make sure that you have a T-10 Torx screwdriver available.
About this task About this task
CAUTION: CAUTION:
A discharge of static electricity from a finger or other conductor might damage system boards or other static-sensitive
devices. To prevent damage, observe antistatic precautions.
CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless all PCI slots have either a CAUTION:
riser slot blank or an expansion card installed.
HPE ProLiant DL385 Gen11 Server Maintenance and Service Guide 133