HPE ProLiant DL385 Gen11 Maintenance And Service Manual page 245

System board assembly replacement System board assembly replacement
Subtopics Subtopics
Removing the system board assembly Removing the system board assembly
Installing the system board assembly Installing the system board assembly
Re-entering the server serial number and product ID Re-entering the server serial number and product ID
Removing the system board assembly Removing the system board assembly
Prerequisites Prerequisites
Perform a backup of critical server data .
Before you perform this procedure, make sure that you have the following items available:
T-15 Torx screwdriver
T-20 Torx screwdriver
Hex screwdriver
Alcohol wipe
Procedure Procedure
1. Power down the server.
2. If installed, open the cable management arm.
3. Remove all power:
a. Disconnect each power cord from the power source.
HPE ProLiant DL385 Gen11 Server Maintenance and Service Guide 245