Table of Contents
Advertisement
CAUTION:
CAUTION: For proper cooling, do not operate the server without the access panel, baffles, expansion slot covers, or blanks
installed.
CAUTION:
CAUTION:
To prevent damage to electrical components, properly ground the server before beginning any installation, removal, or
replacement procedure. Improper grounding can cause electrostatic discharge.
Procedure
Procedure
1. Power down the server.
2. If installed, release the cable management arm .
3. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
4. Disconnect all peripheral cables from the server.
5. Do one of the following:
Extend the server from the rack .
Remove the server from the rack .
6. Remove the access panel .
7. Remove the middle cover:
a. Press and hold the release buttons (callout 1).
b. Disengage the cover from the front cage (callout 2).
Remove the front GPU cage
Remove the front GPU cage
HPE ProLiant DL385 Gen11 Server Maintenance and Service Guide
51
Advertisement
Table of Contents
