Table of Contents
Advertisement
10. Remove the midwall bracket .
11. Disconnect all cables from the drive backplane.
12. Remove the E3.S drive cage:
a. Remove the drive cage screws (callout 1).
Retain all screws for future use.
b. Remove the E3.S drive cage from the server (callout 2).
13. Remove the E3.S drive backplane:
a. Remove the backplane screws (callout 1).
Retain all screws. These screws will be used to install the new spare drive backplane.
b. Remove the backplane from the drive cage (callout 2).
Results
Results
To replace the component, reverse the removal procedure.
HPE ProLiant DL385 Gen11 Server Maintenance and Service Guide
182
Advertisement
Table of Contents
