HPE ProLiant DL385 Gen11 Maintenance And Service Manual page 92

a. Remove the air baffle .
b. Remove the midplane drive cage .
Removing the DIMM when the standard, high performance, or midplane cage heatsinks are preinstalled Removing the DIMM when the standard, high performance, or midplane cage heatsinks are preinstalled
10. Remove the DIMM.
a. Open the DIMM slot latches (callout 1).
b. Lift the DIMM out of the slot (callout 2).
Removing the DIMM when the max performance heatsinks are preinstalled Removing the DIMM when the max performance heatsinks are preinstalled
11. If removing the DIMM from DIMM slot 7–12, remove the PDB for power supplies 3 and 4:
a. Disconnect the cables from the PDB for power supplies 3 and 4.
b. Loosen the PDB captive screw (callout 1), and then remove the PDB from the cage (callout 2).
12. Remove the DIMM.
a. Open the DIMM slot latches (callout 1).
b. Carefully slide the DIMM from the slot under the max performance heatsink (callout 2).
HPE ProLiant DL385 Gen11 Server Maintenance and Service Guide 92