Table of Contents
Advertisement
10. Remove the midwall bracket .
11. Remove the drive backplane bracket .
12. Remove the 4 LFF drive backplane from the drive backplane bracket.
Backplane for Box 1
Backplane for Box 2/3
Results
Results
To replace the component, reverse the removal procedure.
Removing and replacing the 8 SFF drive backplane
Removing and replacing the 8 SFF drive backplane
Prerequisites
Prerequisites
Before you perform this procedure, make sure that you have a T-15 Torx screwdriver available.
About this task
About this task
CAUTION:
CAUTION:
A discharge of static electricity from a finger or other conductor might damage system boards or other static-sensitive
devices. To prevent damage, observe antistatic precautions.
HPE ProLiant DL385 Gen11 Server Maintenance and Service Guide
167
Advertisement
Table of Contents
